1- Fill one bucket with grit guard half way with water.
2- Create about 1-2 gallons of Rinseless solution mixture in the other bucket with grit guard.
3- Select your cuff less wash mitt and dip in the solution fully submerging.
4- Using Zero pressure slide it across one panel (If paint is quite clean and the panels are small you might do two before rinsing).
5- The dirtier the paint is the faster you take it to the “Rinse bucket” and thoroughly clean BEFORE placing back into your “wash bucket” to absorb more solution.
6- Select your drying towel or another clean towel which you will use for drying ONLY the panel which you have already cleaned.
7- Repeat steps 3-6 across the entire car, drying panels before water is allowed to dry on them.
-500ml makes up to 2 Gallons of (1:15) Waterless Spray
-500ml makes up to 3 1/4 Gallons of Quick Detailer (1:25)
-500ml makes up to 5 1/4 Gallons of Clay Lubricant (1:40)
-500ml makes up to 26 1/2 Gallons of Rinse-less Wash (1:200)
| Bottle Size: | 16oz | 24oz | 32oz | 1 gallon |
|---|---|---|---|---|
| 1:15 | 1 oz | 1.5 oz | 2 oz | 8 oz |
| 1:20 | 0.76 oz | 1.15 oz | 1.5 oz | 6 oz |
| 1:25 | 0.62 oz | 0.92 oz | 1.2 oz | 5 oz |
| 1:40 | 0.59 oz | 0.58 oz | 0.78 oz | 3 oz |
1- During the rinseless wash process it is important to clean entire panels before you move to drying that panel. This is to avoid using a dry towel on an area that is still dirty.
2- Directions for care of Microfiber towels will be found on the bottom of the page which is linked again here – Microfiber Madness
1- Avoid sprinkler and hard tap water being left on the surface to dry
2- Remove bird bombs from vehicle surfaces as soon as possible with Ech2o mix
3- For Gloss or slickness topper -CarPro Reload 500ml (17oz)